EGR Cleaner + Injector removal solution

Provides immediate thorough cleaning of air intake system, airflow sensor, inlet valves, turbo and EGR system.

Area of Applications

    • For the air intake manifold, inlet valves, air flow sensor, EGR valve and turbo of all diesel engines.
    • Also recommended to use a can of CleanDrive to maintain cleanliness.
    • Cleans carburettor interior and exterior
    • Rinses holes and jets
    • Cleans intake/throttle body area components
    • To free all moving parts,especially exhaust gas recirculation (EGR) valves
    • To remove heavily coked components such as glow plugs and injectors


    • Dissolves gum, lacquer, tar, carbon and deposits.
    • Removes resinous and oily dirt in the intake manifold.
    • Restores perfect airflow towards the combustion chamber.
    • Provides a regular and stable idle.
    • Eliminates and avoids starting problems.
    • Improves accelerating properties.
    • Is harmless for all after-treatment systems.
    • Reduces fuel consumption by cleaning components.

Suitable for both Petrol and Diesel Engines.

    Data and information contained can only be considered as recommendations. The data is given in good faith and believed to be accurate. However, in view of the multiplicity of possible applications and working methods we are not in a position to assume any responsibility or obligations deriving from the use of our products.Further, you expressly understand and agree that the information is given gratis and we assume no obligation or liability.





  • Intake System Cleaner
  • Quantity – 400ml
  • Product Code – EPI400
  • Packaging Unit 15


  • Spray the parts for cleaning, generously with the engine off or by removing part and allow the active agent to work for 2-3 minutes.
  • Then rinse off loosened contaminants by spraying again with Eco-Motive Professional. Active agent remaining on surfaces acts as residual protection.
  • Curative cleaning of very dirty EGR valve
  • Dismantle the EGR valve (housing).
  • Spray the product directly on the valve, housing and other components, until these parts are very wet.
  • Let the product act a few minutes.
  • Spray again on the parts, until all the dirt has been removed.
  • It can help to remove the dirt with a piece of cloth or paper tissue.
  • Dry the parts with compressed air, cloth or paper tissue.


There are no reviews yet.

Be the first to review “EGR Cleaner + Injector removal solution”

Your email address will not be published. Required fields are marked *